●
Standing alongside the mast or the forks is
prohibited.
●
You must not operate the controls without
looking or without having an adequate and
full view of the danger area around the truck
and of the material to be handled.
●
The truck must not be used by more than
one person at once.
– The use of controls located on the keypad
engages a safety system that locks all other
truck functions (driving, lifting, lowering).
– During use, the display may show the fol-
lowing warning, which varies depending on
the language set (the image relates to Eng-
lish):
●
"Trazione disattivata - Idraulica addizionale
attiva"
●
"Traction inactive - Hydraulique add. Active"
●
"Traction deactivated - Aux. hydraulic ac-
tive"
●
"Antrieb inaktiv - Zusatzhydraulik aktiv"
●
"Tracción desactivado - Hidráulica adicional
activa"
●
"Tractie uitgeschakeld - Aux. hydraulische
actief"
Keypad for an auxiliary hydraulic line
without clamp
The keypad has three buttons:
●
Consent button
C
, green
●
Free button
D
, white
●
Free button
E
, white
●
Buttons
D
and
E
are intended for additional
equipment for use by the customer, e.g.
side shift or fork synchroniser
To activate one of the two commands
D
or
E
,
hold down the green consent button
C
with
one hand, and with the other hand press the
required command
D
or
E
.
Keypad for an auxiliary hydraulic line
with clamp
Overview
3
Options and variants
78 45758043484 EN - 11/2021 - 08
To Next Page
Loading...
