Operation 5
Working with loads
The load capacity indicated for the truck must
not be exceeded. It depends on the centre of
gravity of the load and the lift height.
Take into account the load capacity label
affixed to your truck.
WARNING
The figure above is only an example.
Only load capacity labels affixed to your truck are
valid.
The placement of additional weights to in-
crease load capacity is prohibited.
DANGER
Risk to life
Never exceed the maximum loads indicated! These
ratings apply to compact and homogenous loads.
Otherwise, the stability and strength of the fork
arms and lift mast are not guaranteed.
Improper or incorrect use or the placement of
persons to increase load capacity is prohibited.
Pickingupaload
In order to guarantee load stability, ensure
that the load is well balanced and centred on
the fork arms and that the fork arms have been
sufficiently slid underneath the load. The load
should not excessively extend over the fork
arms, nor should the fork arms excessively
protrude out from the load.
Danger area
The danger area is the area in which people
are at risk due to the movements of the truck,
its working equipment, its load-carrying
equipment (e.g. attachments) or the load.
Also included are the areas where loads
could fall or working equipment could fall or
be lowered.
DANGER
Risk of injury!
– Do not step on the fork.
50
108043033 [EN] 91
To Next Page
Loading...
