Need help?Do you have a question about the Still FM-X and is the answer not in the manual?
Details on packaging and disposal of truck components and batteries.
Information on documentation scope, symbols, and abbreviations.
Explanation of danger, warning, and caution symbols.
Alphabetical list of abbreviations used in the manual.
Guidelines for proper and impermissible use of the truck.
Specifies the intended purpose and safe operation of the truck.
Defines approved locations and conditions for truck operation.
Identifies potential dangers and residual risks during truck operation.
Table detailing hazards, measures, and notes for safe operation.
Defines roles like operating company, specialist, and drivers.
Details on driver qualifications, rights, duties, and behavior.
Covers insurance, changes, modifications, and general safety.
Information on regular inspections and insulation testing.
Guidelines for safe handling of oils, fluids, and other materials.
Safety precautions for handling oils, including flammability and toxicity.
Safety information regarding the handling of battery acid.
Details on noise emissions and vibrations.
Specifies sound pressure levels and measurement procedures.
Provides data on weighted effective value of acceleration.
General overview with labeled components of the truck.
Identification of key components within the driver's cabin.
Detailed identification of controls and displays in the driver's cabin.
Description of the truck's main display and control interface.
Detailed explanation of the Joystick 4Plus control system.
Explanation of the fingertip control system for attachments.
Information found on the truck's identification nameplate.
Explanation of the coded information within the production number.
Pre-operation checks and tasks for safe truck readiness.
Guidance on performing visual checks before truck operation.
Instructions for adjusting the driver's seat for comfort and safety.
Steps for initial setup and commissioning of the truck.
Details on selecting and adjusting drive programmes for performance.
Comprehensive section on safe driving practices and regulations.
Essential safety rules and conduct for truck operation.
Information on ensuring adequate visibility during operation.
Procedure for selecting forward, reverse, or neutral drive directions.
Detailed procedures for all lifting operations and systems.
Explanation of the function that prevents lifting above a certain height.
Guidelines and safety regulations for picking up and transporting loads.
Procedure for securely picking up loads onto the forks.
Instructions for fitting, controlling, and using truck attachments.
Information on operating additional truck equipment.
Details on the battery change frame's general use and safe handling.
Functionality and operation of the automatic lift height selection system.
Information on cab features, controls, and operation.
Specifics for operating trucks in cold store environments.
How to interpret error messages and symbols on the display.
Guidelines for operating the truck in non-standard conditions.
Procedures and safety warnings for towing the truck.
Steps to take in emergency situations like truck tipping or shutdown.
Safety regulations and procedures for battery maintenance and replacement.
Critical safety rules for all battery-related operations.
Instructions and warnings for safely charging the truck battery.
Procedure for replacing the battery using a crane.
Steps for properly commissioning the battery after installation.
Procedure for entering battery type and capacity data.
Information on personnel qualifications and maintenance scheduling.
Requirements for personnel performing maintenance work.
Guidelines on maintenance intervals based on operating hours.
Essential safety rules for performing maintenance and repair work.
Safety precautions and procedures for lifting and jacking the truck.
Procedures for routine checks and servicing of truck components.
Steps for checking battery health and electrolyte levels.
Guidelines for maintaining wheel and tyre condition.
Procedure for identifying and rectifying hydraulic system leaks.
Instructions for lubricating lift mast and roller track components.
General dimensional information for the truck models.
Detailed technical specifications for FM-X 10 and FM-X 12 models.
Key characteristics of FM-X models including manufacturer and drive type.
Performance metrics such as driving and lifting speeds.
Detailed technical specifications for FM-X 14 and FM-X 17 models.
Detailed technical specifications for FM-X 20 models.
Detailed technical specifications for the FM-X 22 model.
Detailed technical specifications for the FM-X 25 model.
Information on permissible tyre types for different models.
Lists permissible tyre types and safety warnings.
To Next Page
General
