6 Maintenance
General maintenance information
At operating hours
Carried
out
3000 6000 9000 12000 15000
Special equipment
Check the heating system for damage; observe the manufacturer’s maintenance
instructions
Check the attachments for wear and damage; observe the manufacturer’s mainten-
ance instructions
Clean excessive dirt from the battery change frame and check it for deformation/da-
mage Check the freedom of movement of the rollers and keep the surface of the
rollers free of corrosion using a film of oil
Lubricating
Lubricate using approved lubricants in accordance with the lubrication plan
General
Read out and check the error numbers and delete list
Reset the maintenance interval
Check labelling t
o ensure it is complete
Perform a test drive
Additionalma
intenance guidelines for using the truck in a cold store - 500 hours
or every 12 we
eks
At operating hours
500 1000 1500 2000 2500
Carried
out
3000 3500 4000 4500
Truck components
Perform a function check of the entire truck, including all special equipment, special
heating systems, switch-off thermostats etc.
Check al
l important screw connections for secure attachment
Check the condition and mounting of the wheels
Check the function of the steering system
Check the steering play; check the setting of the steering chain if necessary
Perf
orm a special function check of the brake assemblies
Check the hydraulic system for leaks
Che
ck all rollers and wear strips in the lift mast for ease of movement
Perform a visual inspection of the chains and pinion gears
23
8 50988078001 [EN]
To Next Page
Loading...
