5 Operation
Commissioning
Entering truck operating data via the
display and operating unit
Authorisation levels
The authorisation levels determine which
operating data and functions the user can
access. The higher the authorisation level,
the more comprehensive the access to truck
operating data.
The display and operating unit is used to
access operating data at three authorisation
levels:
• Level 1 (driver)
• Level 2 (fleet manager)
• Level 3 (authorised service centre)
The access rights are pre
defined ex works
within the different aut
horisation levels.
Individual access right
s can be moved to a
higher authorisation le
vel.
Level 1 (driver)
Access:
Press the OK button for two seconds
Authorisations:
Set the time (can be moved to a higher authori-
sation level)
Set the date (can be moved to a higher authori-
sation level)
Set the language (can be moved to a higher
authorisation level)
Level 2 (fleet manager)
Access:
Press OK and ESC for 4 seconds
and enter the password for level 2
Authorisations: Battery
-Type
- Capacity
Read out the software and hardware status
Read out the error memory
Toggle the units
Teach-in the lift height preselector (can be
moved to a higher authorisation level)
74
50988078001 [EN]
To Next Page
Loading...
