5 Operation
Operating in special operating sit
uations
the heavy-duty rollers must be placed under-
neath the drive wheel or underneath the posts
on the side of the truck. As the drive wheel
does not come into contact with the ground
when using this towing method, the brakes
can also no longer operate. Therefore, please
observe the safety information in the section
entitled "Releasing the brakes mechanically".
Emergency steering (variant)
A pinion shaft for turning the steering manually
is available as special equipment.
CAUTION
This emergency steering pinion may only be used
when the battery male connector is disconnected.
Crane loading
Crane loading is only intended for transporting
the complete truck for its initial commission-
ing. For application conditions that require
frequent loading or that are not presented
here, please contact the manufacturer with
regard to particular variants.
Trucks may only be laden by persons with suf-
ficient experience with the suitable harnesses
and hoists.
Type-Modèle-Typ / Serial no.-No. de série-Serien-Nr. / year-année-Baujahr
Rated capacity
Capacité nominale
Nenn-Tragfähigkeit
Battery voltage
Tension batterie
Batteriespannung
Rated drive power
Puissance motr.nom.
Nenn-Antriebsleist.
Unladen mass
Masse à vide
Leergewicht
max
min.*
* see Operating instructions
voir Mode d'emploi
siehe Betriebsanleitung
kg
kg
kg
kg
kg
kW
V
*
1
3
2
6210_001-016_V2
Determining the total actual weight
– Park the truck securely; see ⇒ Chap-
ter "Parking the truck securely", P. 5-220.
– Determine the unit weights by reading the
truck nameplate and, if necessary, the
attachment (variant) nameplate.
– Add the determined unit weights to obtain
the total actual weight of the truck:
Tare weight (1)
+
Max. permissible battery weight (2)
+
Ballast weight (variant) (3)
+
Attachment net weight (variant)
=
Total actual weight
18
6 50988078001 [EN]
To Next Page
Loading...
