5 Operation
Lifting
– Remove the securing bolt from the fork
extension (1).
– Push the fork extension onto the fork arms
until it is flush with the fork back.
– Insert the securing bolts loca
ted behind the
fork back fully into the fork ex
tension.
– Insert the linch pin into the securing bolt and
secure.
Removal
– Remove the linch pin (3) from the securing
bolt (2).
– Remove the securing bolt
from the fork
extension (1).
– Pull the fork extension from the fork arms.
– Insert the securing bolt fully into the fork
extension.
– Insert the linch pin into
the securing bolt and
secure.
Working platforms
The use of working pla
tforms in conjunction
with industrial truc
ks is regulated by national
law.
This legislation should be observed. The use
of working platforms is only permitted by virtue
of the legislation in the country of use. Before
using working platforms, consult your national
regulatory authorities.
WARNING
No one should ever stand on the forks to be raised
or transported!
11
8 50988078001 [EN]
To Next Page
Loading...
