5 Operation
Driving
– Select the desired drive direction.
– Actuate the accelerator pedal.
The truck will travel in the sel
ected drive
direction.
NOTE
The drive direction can als
o be changed during
travel. Your foot can remai
nontheaccelerator
pedal while doing so. The tr
uck decelerates
and is then accelerated aga
in in the opposite
direction (reversing).
NOTE
In the event of an electrical fault with the
accelerator the drive unit is shut down. The
truck is braked by regenerative braking.
The truck cannot be driven again until the
accelerator pedal has been released and then
actuated again. If the truck still cannot be
operated, park it securely and contact your
authorised service centre.
Starting drive mode, dual-pedal
version (variant)
DANGER
Being trapped under a rolling or tipping truck could
cause fatal injuries.
– Sit down on the driver’s seat.
– During work, ensure that you have a secure grip
on the truck and a stable seat position. Hold on
tight to the steering wheel with your left hand.
Observe the information in the chapter entitled
"Safety regulations when driving".
The driver’s seat is equipped with a seat
switch. In the event of an operating error
or malfunction, see the chapter entitled
"Enabling truck functions using the foot switch
and seat switch".
– Lift the fork carriage until the necessary
ground clearance is achieved.
– Tilt the lift mast backwards.
– Release the parking brake.
94
50988078001 [EN]
To Next Page
Loading...
