Safety 3
Basic principles for safe operatio
n
Damage, defects and misuse of
safety systems
Damage or other defects on the truck or
attachment must be reported to the supervisor
or responsible fleet manager immediately so
that they can have the defect rectified.
Trucks and attachments that are not functional
or safe to drive may not be used until they have
been properly repaired.
Do not remove or deactivate
safety systems
and switches.
Fixed set values may only be changed with the
approval of the manufacturer.
Work on the electrical system (e.g. connecting
a radio, additional headlights etc.) is only
permitted with the manufacturer’s written
approval. All electrical system interventions
must be documented.
Even if they are removabl
e, roof panels may
not be removed, as they a
re designed to
protect against small f
alling objects.
Tyres
DANGER
Using different tyres has a negative effect on the
stability of the truck. There is a risk of accident!
Only original tyres may be fitted to the truck.
– Make sure that only original tyres are fitted.
Tyre quality affects the stability and handling
of the truck. Changes must only be made in
consultation with the manufacturer. When
changing wheels or tyres, always ensure that
this does not cause the truck to tilt to one side
(e.g. always replace right and left wheels at
the same time).
50
988078001 [EN] 33
To Next Page
Loading...
