Operation 5
Commissioning
1
1
Operating the signal horn
NOTE
The signal horn is used to warn people against
imminent danger or to announce your intention
to overtake.
– Push the signal horn butt
on (1).
The signal horn sounds.
Checking the brake system for
correct function
DANGER
If the brake system fails, the truck will be braked
insufficiently or not braked at all, posing a risk of
accident!
– Do not commission the truck with a defective
brake system.
Checking the service brake
There must be a distance of at least 60 mm
between the pressure point and the brake
pedal stop.
– Accelerate the truck without a load in a clear
area; see "Driving" chapter.
– Press the brake pedal firmly; see the
chapter entitled "Operating the service
brake".
The truck must decelerate noticeably.
Checking the generator brake
– Accelerate the truck without a load in a clear
area; see "Driving" chapter.
– Release the accelerator pedal; see the
chapter entitled "Starting drive mode".
The truck must decelerate slightly.
50
988078001 [EN] 79
To Next Page
Loading...
