Operation 5
Driving
• Cornering with an inadequately secured
load.
• Cornering too fast on a smooth or wet
roadway.
Reduction in speed of hydraulic functions
This variant optimises the
speed of the hy-
draulic functions, taking
the lift height and load
weight into account. The re
duced load vibra-
tions assist the driver whe
n handling the truck.
DANGER
Risk of tipping due to change in vibration characte-
ristics of the load!
If the controller is switched off or fails, the speed of
the hydraulic functions will no longer be reduced.
– Always adapt the use of the hydraulic functions
to suit the situation.
– Do not take risks with safety.
The optimisation of the hydraulic functions
affects the following functions:
• Shifting the reach carriage
• Tilting the lift mast
• Transition shift of the lift mast
This variant can also be equipped with the
following additional functions:
• Lift height indicator
• Lift height preselector
• Transition shift centre position
• Tilting centre position
Driving
Safety regulations when driving
Driving conduct
The driver must comply with the highway code
when driving within the plant.
The speed must be appropriate to the local
conditions.
For example, the driver must drive slowly
around corners, in and around tight passage-
50
988078001 [EN] 85
To Next Page
Loading...
