Operation 5
Cold store application
– Switch on the desired heating function by
actuating the relevant rocker switch; see the
chapter entitled "Cab operating devices".
Switching off the heating system and
blower
DANGER
The heating system overheats if the
hot air cannot escape from it. There
is a risk of fire!
The blower may only be turned off if
the heating system is turned off.
– Always turn the heating system off
first.
– Only turn the blower off when the
heating system is switched off.
– Switch off the desired heating function by
actuating the relevant rocker switch; see the
chapter entitled "Cab operating devices".
Changing fuses
DANGER
Using the wrong fuses can result in
short circuits. There is a risk of fire!
– To change the fuses, contact the
authorised service centre.
Cold store application
General
In order to make industrial trucks suitable for
useincoldstores,thetrucksmustbefitted
with auxiliary equipment and subjected to
technical modifications. As a result of this
change in setup, the operational behaviour,
maintenance intervals and maintenance tasks
differ to those for standard industrial trucks.
The following section describes the steps that
must be taken to ensure your cold store truck
retains its functionality in cold-store conditions
over a long period of time.
50
988078001 [EN] 175
To Next Page
