5 Operation
Handling the battery
1
2
In the event of a power failure, the forks can
be lowered manually so that the truck can be
moved to a safe position.
The emergency lowering valve i
s operated
remotely by means of a flexible d
rive. The
handle for operation is locate
d on the reach
carriage near the mast fixture
.
WARNING
The load is lowered!
Control the speed by turning the handle of the
flexible drive by a smaller or larger amount:
– Turning by a smaller amount: load is lowered
slowly.
– Turning a larger amount: load is lowered quickly.
– After ensuring that no persons are in the
vicinity of the truck, use the hexagon key (1)
to slowly release the emergency lowering
valve (2) so that the fork carriage can be
lowered.
– Ensure that the valve is re-tightened once
the forks have been lowered.
– Notify your authorised service centre.
Handling the battery
Safety regulations when handling
the battery
National legal provisions must be followed
when setting up and operating battery charg-
ing stations.
DANGER
Risk of accident
During removal and installation of the battery, no
person other than those involved in the operation
may remain in the danger area.
19
2 50988078001 [EN]
To Next Page
Loading...
