Operation 5
Commissioning
direction is only selected when the drive
direction switch has been actuated once.
Operating hours(3)
The current value of the hour me
ter is shown
in the display field.
Drive programme(4)
The current drive programme (1-4) is shown in
the display field.
Parking brake status(5)
The display field indicates that the parking
brake has been applied.
NOTE
In the event of fault displays, observe the
information in the corresponding chapter; see
the chapter entitled "Fault displays".
Access authorisation with PIN code
(variant)
The truck functions can be activated using a
five-digit PIN code. A button is used in place of
the key switch. Press the button to activate the
truck. After the button is pressed, a message
appears in the display and the symbol flashes.
The five-digit numerical code must now be
entered via the keypad.
If the PIN code is en
tered incorrectly three
times, an acoustic
signal sounds.
Press the button again to switch off the truck.
50
988078001 [EN] 73
To Next Page
Loading...
