5 Operation
Commissioning
Displays after the switch-on process (for trucks with default options)
12
3
4
5
NOTE
Depending on the truck equipment, further
information may be visible on the display and
operating unit.
Battery charge(1)
Theusableba
ttery charge is shown in the
display field
.
NOTE
After connecting a "partially" charged battery:
•
If the current battery charge level is higher
than the value stored most recently by the
truck, the most recently stored value will
initially be displayed. The battery charge
level will not be displayed correctly again
until the current value drops below the most
recently stored value.
Steering p
osition(2)
The symbol for the neutral steering position is
shown in the display field. The actual drive
72
50988078001 [EN]