Operation 5
Handling the battery
Thebatterysitsinaframe. Toreplacethe
battery, this frame is extended in the load
direction together with the reach carriage.
Before the reach carriage is extended, the
battery lock lever must be actuated. When the
reach carriage is fully retracted, the battery
frame is mechanically locked again.
The battery is to be installed or removed with
a crane.
Maintenance personnel for batteries
Batteries may only be charg
ed, maintained
or changed by properly trai
ned personnel
in accordance with the ins
tructions of the
manufacturers of the batt
ery, battery charger
and truck.
– The handling instructions for the battery and
the operating instructions for the battery
charger must be followed.
Removing the battery
– Retract the reach carriage fully.
– Apply the parking brak
e.
– Unlock the battery lock (see the chapter
entitled "Actuating the battery lock").
NOTE
The bolt must audibl
y release.
– Press the foot switch.
50
988078001 [EN] 201
To Next Page
Loading...
