5 Operation
Working with loads
7090_800-009
– Lower the load and maintain appropriate
ground clearance.
Now you can drive away.
7090_800-010
Transporting loads
WARNING
Risk of accident! As the height at which a load is
transported increases, the stability decreases.
– Always drive with the load lowered.
– Lower the load until ground clearance is reached
(not more than 300 mm).
The load should not be high enough to block the
front view. Otherwise, drive backwards. If this is
not possible, a second person acting as a guide
must walk beside the truck. Only drive at walking
speed taking extra care. Stop the truck immediately
if contact with the guide is lost.
When using attachments, special conditions
apply, see ⇒ Chapter "Assembling attach-
ments",P.5-116.
DANGER
The truck can tip over or the load can fall.
Driving with the mast tilted forward is not permitted.
110 171673 [EN]
To Next Page
Loading...
Need help?
General
