5 Operation
Error messages
Error messages
Diagram
1
7071_003-034
If a malfunction or a message is displayed
on the display and control(1)unit, the display
lights up on the combination display for direc-
tion of travel/flasher/message.
6321_003-026
23
4
The following malfunction indications and
messages can appear on the display:(2)A gra-
phic symbol and a message describing(3)the
faulty function and an error code consisting
of(4)a letter and a 4-digit number.
Fault displays are always displayed on a cyclic
basis for a number of seconds, depending on
the fault.
If more than one fault occurs, they are shown
one after the other. This is followed by a
pause, with its length also depending on the
type of fault. During this pause the status dis-
play of the truck is shown.
138 171673 [EN]
To Next Page
Loading...
Need help?
General
