Maintenance 6
3000-hour maintenance/two-year maintenance
3000-hour maintenance/two-year maintenance
Work that must also be carried out
– Carry out maintenance work as neces-
sary, see ⇒ Chapter "Maintenance as re-
quired", P. 200.
– Carry out 500-hour maintenance,
see ⇒ Chapter "500-hour mainte-
nance/semi-annual maintenance", P. 222.
– Carry out 1000-hour maintenance, see
⇒ Chapter "1000-hour maintenance/annual
maintenance", P. 223.
1
7071_003-117
Changing the gear lubricant oil
WARNING
Consumables are toxic!
– Observe the safety regulations
for handling gear lubricant oil, see
⇒ Chapter "Oils", P. 3-29.
– Park the forklift truck on a level surface.
– Raise the truck on blocks, see ⇒ Chap-
ter "Raising and jacking up", P. 6-191.
– Remove the wheels from the drive axle.
– Place a suitable collection vessel under the
oil drain plug (1).
– Unscrew the oil drain plug (1) and allow the
oil to drain out completely.
ENVIRONMENT NOTE
Disposeofusedoilaccordingtoapplicable
regulations.
– Change the sealing ring on the oil drain plug
(1).
– Tighten the oil drain plug (1) to a torque of
24 Nm.
171673 [EN] 235
To Next Page
Loading...
Need help?
General
