6 Maintenance
Cleaning
– After cleaning, immediately apply com-
pressed air to chain to remove any water
remaining in the chain joints. Move the
chain several times during this process.
– Immediately spray the chain with chain
spray according to the maintenance data
table (see ⇒ Chapter "Maintenance data
table", P. 6-186) while moving the chain.
1
7071_003-042
Cleaning the windscreens
On trucks with cabs (special equipment), the
glass windscreens (1) must always be kept
free of dirt and ice in order to ensure clear
vision.
– Cleaning the windscreens.
NOTE
The windscreens can be cleaned using a con-
ventional glass cleaner.
7081_003-029
After washing
– Carefully dry truck (e.g. with compressed
air).
– Sit on the driver’s seat and start up the vehi-
cle in line with the regulations.
CAUTION
Risk of short circuit!
– If any moisture has penetrated into the motors
despite the precautionary measures taken, first
dry them using compressed air.
– The truck must then be started up to prevent
possible corrosion damage.
198 171673 [EN]
To Next Page
Loading...
Need help?
General
