Still R70-45T User Manual

Operation 5
Error messages
6327_342-003
SICHERHEITSGURT
Seat belt not worn, driver’s seat occu-
pied.
– Switch on key switch.
The message
SAFETY BELT appears in the
display as long as you operate an operating
lever, the steering wheel, or the accelerator
pedal. The forklift truck drives slowly or does
not drive at all; depending on the selected ver-
sion, the working functions are either available
as normal, slowed down or not available at all.
– Fit the seat belt in line with the instructions
and fasten it.
The forklift truck can again be operated with-
out restriction.
6327_342-004
SICHERHEITSGURT
The seat belt is constantly fastened and
the driver’s seat is then occupied.
– Switch on key switch.
The message
SAFETY BELT appears in the
display if you operate an operating lever or
the accelerator pedal. The forklift truck drives
slowly or does not drive at all; depending on
the selected version, the working functions are
either available as normal, slowed down or not
available at all.
– Remove the seat belt from the buckle, fit the
belt in line with the instructions and fasten it
again.
The forklift truck can again be operated with-
out restriction.
The seat belt is not fastened until after
the key switch has been switched on.
– Switch on key switch.
The message
SAFETY BELT appears in the
display if you operate an operating lever or
the accelerator pedal. The forklift truck drives
slowly or does not drive at all; depending on
the selected version, the working functions are
either available as normal, slowed down or not
available at all.
171673 [EN] 143

Still R70-45T Specifications

General

Brand	Still
Model	R70-45T
Category	Forklifts
Language	English