Still R70-45T User Manual

5 Operation
Error messages
7311_003-046
SITZSCHALTER
Exceeding the shift time
NOTE
The shift time is adjustable.
When the key switch is switched on after sit-
ting steadily for the set time, the message
SITZSCHALTER (SEAT SWITCH)appears
on the display. This also occurs when an
operating lever or the accelerator pedal is op-
erated. The forklift truck will only move slowly;
the work functions can be executed normally,
only slowly, or not at all depending on the se-
lected version.
– Stand up briefly from the seat and then sit
back down.
The forklift truck can again be operated with-
out restriction.
7311_003-047
SITZSCHALTER
Exceeding the operation time
NOTE
The operation time is adjustable.
If, while the key switch is switched on and
the parking brake is released, the driver’s
seat is occupied longer than the set oper-
ation time and the accelerator pedal or an
operating lever was not operated during this
time, the message
SITZSCHALTER (SEAT
SWITCH)
appears in the display. The forklift
truck can move only slowly; the work functions
can be executed normally, only slowly, or not
at all depending on the version.
– Stand up briefly from the seat and then sit
back down.
The forklift truck can again be operated with-
out restriction.
146 171673 [EN]

Still R70-45T Specifications

General

Brand	Still
Model	R70-45T
Category	Forklifts
Language	English