Operation 5
Shut-down
– Check engine oil for condensed water,
change if necessary, see
– Check hydraulic oil for condensed water;
change if necessary.
– Perform maintenance as before initial start-
up.
– Connect LPG cylinder, see ⇒ Chap-
ter "Changing the LPG cylinder", P. 5-165.
– Check the gas fuel system system for leaks
with leak spray.
– Check the connections of the gas fuel sys-
tem system for tightness.
DANGER
Risk of explosion!
After a truck has been shut down
in an enclosed room for a lengthy
period, ventilate thoroughly before
switching on electrical system.
– Put the truck into service.
Check during start-up in particular:
• tightness and function of gas fuel system
• drive, control, steering
• brakes (service brake, parking brake)
• lifting system (load-carrying equipment,
load chains, fastening)
171673 [EN] 175
To Next Page
Loading...
Need help?
General
