4 Operation
Handling the lithium-ion battery
DANGER
There is a risk of damage, short circuiting and
explosion!
– Do not place any metal objects or tools on the
battery.
– Keep away from naked flames.
– Do not smoke.
– Connect the battery male connector to the
plug on the battery charger.
– Start the battery charg
er.
The charging process starts automatically.
The display signals the charging process by
illuminating the LEDS as a chase light.
The charger indicates when the battery is fully
charged. Only disconnect the battery from the
charger if there is no current is flowing.
The battery has no mem
ory effect. Therefore,
it can be charged in an
y charge state without
the capacity of the ba
ttery being impaired.
At ambient temperatures below 0°C, the
charging process will take much longer.
– Observe the information in the operating
instructions for the battery and the battery
charger.
After charging
The battery charg
er will stop automatically.
– Disconnect the battery male connector from
the plug for the battery charger.
– Insert the battery male connector fully into
the plug connection on the truck.
CAUTION
There is a risk
of short circuit if the
cables are dam
aged.
Do not crush t
he charging cable when
closing th
e battery cover.
– Make sure
that the charging cable
does not
come into contact with the
batter
ycover.
332
171533 EN - 02/2019 - 19
To Next Page
