Operation 4
Replacing and transporting the bat
tery
6327_600-001_V4
1
– Disconnect the battery male connector (1).
CAUTION
There is a risk of short circui
tifthe
cables are damaged!
Position the battery cable o
nthe
battery in such a way that it
cannot be
crushed when removing or
inserting
the battery or when closi
ng the battery
cover.
– Check the connecting c
ables for
damage.
– Ensure that the batte
ry cable does
not come into contact
with the
battery cover.
WARNING
Risk of crushing and shearing!
Personnel must not stand directly
next to the battery or between the
battery and the forklift truck when
removing and inserting the battery
with the forklift truck or lift truck.
WARNING
Risk of accident!
The load capacity of the truck in use must at least
match the battery weight (see battery identification
plate).
6210_606-011
A
B
– Before picking up the battery, the fork arms
must be adjusted to match the opening
in the chassis (A). Push the fork arms
together. Maintain the maximum possible
distance between the fork arms.
Taking up the battery
CAUTION
Risk
of component damage!
–Th
e fork arms must not be moved underneath
t
he battery beyond the length of the opening in
th
e chassis.
NOTE
It is helpful if this measurement (B), measured
from the fork tips, is marked on the fork arms.
171
533 EN - 02/2019 - 19 339
To Next Page
