4 Operation
Replacing and transporting the bat
tery
The battery (1) can remain on the change
frame (2). The change frame can then be
used to set the battery down.
– If a substructure (
3) is used to set down the
battery (1), ensur
e that the change frame
(2) does not protru
de beyond the battery.
– Set the battery down on a stable base so
that it is secure. Position the battery against
the stops on the base.
– Move the change frame out from under the
battery.
– Pick up the new ba
ttery using the change
frame and transp
ort the new battery to the
truck.
– Position the battery cable on the battery
so that it will not become trapped when the
battery is inserted.
– Position the battery at a right angle to the
truck.
– Carefully insert the
battery into the battery
compartment.
Once the battery is
positioned correctly
in the battery com
partment:
– Carefully place the battery onto the battery
holding fixtures.
– Carefully move the change frame out from
under the battery.
344
171533 EN - 02/2019 - 19
To Next Page
