Maintenance 5
Preserving operational readiness
– At the lubricating nipples (4), lubricate the
axle stub bearing and the steering lever
bearings with grease in accordance with the
"maintenance data table".
If, after a few strokes, there
is no longer any
old grease escaping, actuate
the steering.
WARNING
Risk of crushing!
Do not actuate the steering during lubrication.
– Switchonthetruck.
– Actuate the steering.
– Park the truck securely again.
– Repeat the lubrication procedure.
NOTE
Please note: the more
often the truck is
cleaned, the more fre
quently it must be
lubricated.
Checking the lines
for leaks
– Retighten leaky connections.
NOTE
Have faulty lines replaced by your authorised
service centre.
– After repairs, force out any trapped air by
turning the steering wheel from stop to stop
several times.
Checking the tightening torque of the
axle stub nuts
– Set steering to end stop.
– Park the truck securely again.
171
533 EN - 02/2019 - 19 399
To Next Page
Loading...
