Operation 4
Checks and tasks before daily use
7311_003-048
1
2
3
Fastening the seat belt
DANGER
Risk to life when driving without a seat belt!
If the truck tips over or crashes into an obstacle
and the driver is not wearing the seat belt, the driver
maybethrownfromthetruck.Thedrivercouldslide
underthetruckorcollidewithanobstacle.
There is a risk of fatal injury!
– Fasten the seat belt before every trip.
– Do not twist the seat belt when fastening it.
– Only use the seat belt to secure one person.
– Have any malfunctions repaired by the authori-
sed service centre.
NOTE
The buckle has a buckle switch (variant). In
the event of an operating error or malfunction,
the message
SAFETY BELT
appears in the
display and operating unit, see the chapter
entitled "Display messages".
– Pull the seat be
lt (3) out of the belt retractor
without jerkin
g and fasten closely around
the body over th
e thighs.
NOTE
Sit as far back as possible so that your back
is leaning against the seat backrest. The
automatic blocking mechanism permits
sufficient freedom of movement on the seat.
– Click the belt tongue (2) into buckle (1).
– Check tension of the seat belt. It should be
close to the body.
171
533 EN - 02/2019 - 19 83
To Next Page
Loading...
