STMicroelectronics STM32 User Manual

AN4989 Rev 3 111/118
AN4989 Managing various targets on the same PC
117
Figure 87. IAR™ EWARM Debug Probe Selection with nickname
Important: The pop-up window is displayed only at first time. The selection made is then
applied by default to further connections. Changing this initial selection requires that the
"Debug Probe Selection" display is forced by setting the "Always prompt for probe selection"
option in Option -> ST-LINK -> Setup as shown in
Figure 88.
Figure 88. Probe selection prompt setting on IAR™ EWARM

STMicroelectronics STM32 Specifications

General

Brand	STMicroelectronics
Model	STM32
Category	Microcontrollers
Language	English