STMicroelectronics STM32 - Figure 72. Access to DBGMCU Register with IAR EWARM

AN4989 Rev 3 97/118
AN4989 Managing DBGMCU registers
117
IAR™ EWARM
Read/Write of DBGMCU registers is possible through the register window as shown in
Figure 72:
Figure 72. Access to DBGMCU register with IAR™ EWARM
In case a more permanent setup is required EWARM C-SPY
®
debugger macros enable to
define
execUserSetup(), which is executed at debugger start prior to program execution.
Figure 73 shows the Project Option Debugger -> Setup Pane.