Breaking and stepping into code AN4989
54/118 AN4989 Rev 3
5.2.3 STM32CubeIDE
In Run -> Debug Configuration -> Debugger Pane
Figure 37. Access to Generator Options in STM32CubeIDE V2.0.0
Note: SWD communication is always possible on all ST boards whereas JTAG is only present on
EVAL boards.
SWD communication is always present on all Cortex
®
-M devices whereas JTAG is not
present on Cortex
®
-M0(+) devices. Refer to Appendix D on page 116 for a complete
overview of debug capabilities for each Cortex
®
-M type.