22
2 Safety instructions
Safety precautions regarding the machine's life phases
Danger by electrical energy
Danger by electrical energy
Reason
Measures
Danger to life by electrical shock
during work on the electrical
assembly of the machine.
Work is to be done only by an
electrician.
Switch off machine.
Remove building fuses.
Secure the machine against being
switched on again. Lock the main
switch.
Danger to life by electric shock in
case of electric faults like loose or
defective connectors/plugs or
braised or damaged cables.
Deactivate the machine immediately.
Remove building fuses.
Secure the machine against being
switched
on again. Lo
ck the main
switch.
Eliminate all faults that can be caused
by an electrician.
Danger by operating materi als
Danger by operating
materials
Reason
Measures
Danger of chemical burns during
contact with oil, grease and other
chemical substances.
Wear protective gear (e.g. safety
glasses, gloves).
Observe the country-specific laws and
regulations.
Observe the manufacturer's
specifications (safety data sheet).
Injuries by oil pressure in case of
damaged lines of the central
lubrication that are under a high oil
pressure (30 bar).
Deactivate the machine immediately.
Secure the machine against being
switched on again. Lock the main
switch.
Get the damaged lines replaced by a
mechanic.
Remove the outcoming oil immediately.
Injuries by compressed air in case of
damaged pipes of the fluff
absorption that are under a high air
pressure (3-6 bar).
Deactivate the machine immediately.
Secure the machine against being
switched on again. Lock the main
switch
.
Get the damaged lines replaced by a
mechanic.
Danger of skidding if the oil, grease
or other substances are blocked or if
a leakage appears.
Immediately mop these substances.
Observe the country-specific laws and
regulations.
To Next Page
