7
Safety instructions
2
Organizational measures
Organiza tional mea sures
2.2 Organizational measures
The operating instructions are to be made accessible to all personnel who
are responsible for working on the knitting machine.
The operator must ensure that the contents of the operating instructions
are clearly understood and can be applied by the personnel who are
responsible for working on the machine.
Apart from this the operator must ensure t
hat the national/domestic
regulations are observed and followed. They are for example regulations
– for prevention of accidents,
– for protection of health,
– for environmental protection,
– for technical rules and
– for a safe and proper working.
The
knitting machine is to be used only in a technica
lly sound condition
and as per the stipulated conditions, awareness about the safety and
dangers should be there and the operating instructions must be followed.
The warnings on the machine are to be maintained in a complete and
legib
le condition.
Procurement of spare parts: [11]
No modifications, additions or conver
sions may be made on the machine
that are not authorized by Stoll.
Use only the original Stoll spare pa
rts during repairs and maintenance.
No arbitrary changes are to be made in the program in the operating
system
of the computer, the machine software and the controlling system/
controls.
No foreign software is to be
installed in the machine.
Personnel qualifications and selection
To Next Page
Loading...
