Stoll CMS 502 - Electrical Data

28
3 Electrical data of the machine
Gauge ranges
3.2 Electrical data
Connection data of the knitting machine
Electrical data Values
Supply voltage 230 / 400 V ±10 %
50 or 60
Hz
Phase number 1 (2)
Rated current 10 A
Protection of the mains to the
knitting machine
16 A slow-blow
Power consumption 2,3 kW
CMS 502: 1.7 kW
Connection data of the knitting machine
Before connecting the machine, check the mains voltage available on site.
It is generally not admissible to connect e
lectrical or electronic components of
other makes to the machine's internal wiring. A guarantee for a faultless
function of the machine cannot be ensured in those cases.
If the knitting machine is operated with a generator, make sure
that the
voltage
supplied by the generator meets the requirements of the EN 60204-1, Parag.
4.3.1.
In case of queries, please c
all the Stoll Helpline.
Gauge ranges