Stoll CMS 502 - Page 4

6 Optical and acoustic signal elements ............................................................... 38
6.1 Signal light ......................................................................................................................... 38
6.2 Touch screen ..................................................................................................................... 39
6.3 Horn ................................................................................................................................... 40
6.4 Lamps on the yarn control device...................................................................................... 41
7 Assembly and setting up .................................................................................. 42
7.1 Preparing assembly ........................................................................................................... 42
7.1.1 Preparing installation location................................................................................... 42
7.1.2 Having tools and aids ready ..................................................................................... 42
7.1.3 Transporting machine to installation location ........................................................... 43
7.1.4 Unpacking knitting machine...................................................................................... 43
7.2 Assembling machine.......................................................................................................... 44
7.2.1 Putting up knitting machine ...................................................................................... 44
7.2.2 Connecting the knitting machine (mains voltage 230 V) .......................................... 48
7.2.3 Connecting the knitting machine (mains voltage 400 V) .......................................... 53
7.2.4 Connecting the knitting machine (mains voltage 230 V / 120 V, "Phase-Phase") .... 58
7.2.5 Plug in battery pack .................................................................................................. 63
7.2.6 Mounting the yarn guide device................................................................................ 64
7.2.7 Mounting signal light................................................................................................. 66
7.2.8 Mounting friction feed wheel..................................................................................... 67
7.2.9 Set date and time ..................................................................................................... 68
7.2.10 Aligning knitting machine.......................................................................................... 69
7.3 Carry out the reference run................................................................................................ 72
7.4 Glue on measuring tape .................................................................................................... 73
7.5 How to bring the carriage to an immediate standstill ......................................................... 74
7.6 Checking protective devices .............................................................................................. 75
4