45
Assembly and setting up
7
Assembling machine
2. Lift the knitting machine with a fork lift from the transport surface.
3. Bring the knitting machine to the site of installation.
4. Lay Washers (1) from the accessories unde
r the knitting machine foot.
Place the washers in such a manner that the cavity comes exactly under
the grub screw (2).
5. Setting knitting machine on the floor
6. Remove wood pieces, adhesive strips, packin
g film and paper.
7. Remove the screws (5). In the case of the CMS 502, loosen the scre
ws (5).
To Next Page
Loading...
