Treat IPSec interfaces
as internal interfaces
If this option is selected, IPSec interfaces will become internal - and therefore
protected - interfaces.
All networks that are able to go through IPSec tunnels must therefore be legitimized
and static routes allowing them to be contacted must be declared. Otherwise, the
firewall will reject the IPSec traffic.
IMPORTANT
When this checkbox is selected, the option will apply to all IPSec tunnels
defined on the firewall.
Configuring profiles
This screen consists of 2 sections:
l A zone for editing various possible profile configurations
l A zone for associating protocol profiles
Select the application profile associated with the protocol from the drop-down list by clicking on
the arrow to the right of the field.
To return to the previous menu, click on “Go to global configuration”.
Page 161/448 sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
SNS - USER CONFIGURATION MANUAL V.3
INSPECTION PROFILES
To Next Page
