Appendix A: Allowed names
These are the characters allowed or prohibited on items saved on your firewall:
Firewall name
Firewall name must contain less than 16 characters. Allowed characters are:
<alphanum> - _ .
Login and password
l Login (prohibited characters):
" <tab> & ~ | = * < > ! ( ) \ $ % ? ' ` @ <space>
l PPTP login (allowed characters):
<alphanum> - _ .
l Password (prohibited characters):
" <tab>
Comments (prohibited characters)
" # @
Interface names
l Names of interfaces may not contain the following words if they are immediately followed by
numbers (e.g.: ethernet0, dialup123):
loopback ethernet wifi dialup vlan bridge agg ipsec sslvpn gretun gretap
l Names must not begin with the following prefixes:
firewall network serial loopback
l Names must not be a reserved word:
Ipsec dynamic sslvpn any protected notprotected
l Names must not contain the following characters:
@ " # <tab> <space>
Objects
l Prohibited characters:
<tab> <space> | ! " # , = @ [ \ ]
l Prohibited prefixes:
Firewall_ Network_ ephemeral_ Global_
l Prohibited names:
any internet none anonymous broadcast all
Page 428/448 sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
SNS - USER CONFIGURATION MANUAL V.3
APPENDIX A: ALLOWED NAMES
To Next Page
Loading...
