Operating mode
On industrial firewalls, indicate the mode selected for hardware bypass (for further
information on how bypass works, please refer to the chapter General configuration
tab in the Configuration module. The value of this field may be one of the following:
"Security", "Safety", "Bypass" (the bypass mechanism is activated" or "Not detected"
(default value for non-industrial firewalls).
When the mouse is rolled over this row, details of the bypass status will be displayed
(SystemOff, JustOn, RunTime, RunTimeWatchdogTimer).
Internal disk
Status of the internal disk. An alarm will appear if the disk is defective. Scrolling over
this row with a mouse will display the list of tests performed and their results.
Removable disk Status of the removable disk if the firewall has one. An alarm will appear if the disk is
defective. Scrolling over this row with a mouse will display the list of tests performed
and their results.
RAID Status of the RAID (redundant set of independent or low-value hard disks) and of its
disks, if the option is available on the hardware.
An alarm will appear if a disk is defective or missing.
Power supply Status of the power supply modules if the firewall has any. The value of this field may
be one of the following: “Power on”, “Power off” or “Not detected” (missing or defective
module).
Properties
This window shows the data essential to the configuration of your firewall.
Warning
This box shows available update version and warnings that the administration interface has
raised concerning the firewall’s configuration.
Update Available This entry indicates whether a new version of the firmware is available. If this is the
case, a link bearing the name of the available version will allow the user to download
it. To install it, go to the Maintenance module, System update tab.
Properties
Serial number Your Stormshield Network Firewall’s reference.
Date Date and time in real time.
Backup partition Absence or presence of a backup partition on your system (cf Menu
System>Maintenance module >Configuration tab).
Uptime Duration for which the firewall has been running uninterrupted.
Stormshield Network
Activity Reports
Enables the generation of reports.
Policy
Filtering Profile applied for the filter and NAT policy. A “Collapse/Expand” button has been
added for filter rules.
VPN Status of the VPN on your network.
Dynamic DNS
Status of the dynamic DNS client.
Page 89/448 sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
SNS - USER CONFIGURATION MANUAL V.3
DASHBOARD
To Next Page
Loading...
