Query domain name
servers and create
associated host
objects
If this option is selected, the firewall will retrieve DNS servers from the DHCP server it
contacts (access provider, for example) to obtain its IP address.
Two objects will be dynamically created in the object database upon the selection of
this option: Firewall_<interface name>_dns1 and Firewall_<interface name_dns2. They
can then be used in the configuration of the DHCP service. So, if the Firewall provides
the users on its network with a DHCP service, the users will also benefit from the DNS
servers given by the access provider.
Advanced properties
Initialization strong String of characters used optionally for initializing the connection.
Connection Connection when there is traffic (on demand) establishes a connection with the
internet only when a connection request is made by the internal network (this is more
economical than in the case of a link that is charged by duration). The Permanent
connection keeps the connection to the internet permanently active.
3G/4G modem
Use this modem By selecting this option, you will enable the modem.
Name(mandatory) Name given to the modem. (See warning in the introduction to the chapter on
Interfaces)
Comments Allows you to enter comments regarding the modem.
Modem type Indicates the type of modem chosen in the creation phase.
Color Color assigned to the modem.
Authentication
Identifier Name used for authentication
Password Password used for authentication. If you click on the key icon to the right of the field,
the password will appear in plaintext for 5 seconds.
Connectivity
Access point name This information varies according to each access provider and is given to you when
your 3G/4G subscription begins.
Number to dial
This is the number that the modem needs to dial in order to connect to the access
provider's network.
Default IP address of
the remote server
Your access provider will give you this address.
PIN code of the SIM
card
Information that comes with your SIM card
Advanced properties
Connection Connection when there is traffic (on demand) establishes a connection with the
internet only when a connection request is made by the internal network (this is more
economical than in the case of a link that is charged by duration). The Permanent
connection keeps the connection to the internet permanently active.
USB modem This is the configuration mode selected when the modem was created (Automatic
detection or customized profile)
Page 201/448 sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
SNS - USER CONFIGURATION MANUAL V.3
INTERFACES
To Next Page
Loading...
