Stormshield SN series - IPS Tab; Rtcp; Rtsp; RTSP Commands

Support
Disable intrusion
prevention
When this option is selected, the scan of the RTP protocol will be disabled and traffic
will be authorized if the filter policy allows it.
Log every RTP query Enables or disables the generation of logs relating to the RTP queries.
RTCP
“IPS” tab
Allowed RTCP commands
RTCP commands can be defined in the intrusion prevention module, by clicking on Add. They are
limited to 115 characters and can be deleted when needed.
Prohibited RTCP commands
RTCP commands can be prohibited in the intrusion prevention module, limited to 115 characters.
Support
Disable intrusion
prevention
When this option is selected, the scan of the RTCP protocol will be disabled and traffic
will be authorized if the filter policy allows it.
RTSP
RTSP is an application-level communication protocol for media streaming systems. It allows
monitoring a media server remotely, offering typical audio/video player features such as “play”
and “pause” and allows time-based access.
RTSP commands
Allowed RTSP commands
Add Inserts a command in the list of additional commands that require authorization.
Delete Select the command to remove from the list and click on Delete.
Prohibited RTSP commands
Add Inserts a command to the list of additional prohibited commands.
Delete Select the command to remove from the list and click on Delete.
Maximum size of elements (bytes)
RTSP requests Maximum size of the request and the response. Allows managing memory overflow.
RTSP header Maximum size of the header. Allows managing memory overflow.
SDP protocol Maximum size of an SDP line. Allows managing memory overflow.
Content-Type Maximum size of the «Content-Type» header.
Page 282/448 sns-en-user_configuration_manual-v3 - Copyright © Stormshield 2016
SNS - USER CONFIGURATION MANUAL V.3
PROTOCOLS