Stratasys Objet500 - Page 202

Objet500 User Guide 6 Operating and Maintaining the Objet500 3DPrinter
DOC-07027 Rev.E 6-71
4. SelecttheUVlamp(s)tobereplacedandclickNext.
Figure6-107UVlampselectionscreen
5. DisconnecttheUV-lamppowerconnectorandtheUVheatfuse
connector.
Figure6-108DisconnectingtheUVlamp
Note:Donotdisconnectthepowerconnectiontothecoolingfans.