9
PART 1 • English
English
5.3 Setup
This menu allows you to set OSD Language, Subtitles preference, TV System, Region and Time, Timer
Setting, OSD Setting and Parental Lock.
1. Use pq to highlight the desired menu and press OK to proceed. Select the desired
item with pq. Settings can be changed with the tu buttons. To get a better
overview of possible settings, press OK first. Now you can select settings with pq
and confirm with OK.
2. Press EXIT button to exit.
5.3.1 OSD Language
This menu allows you to set the OSD Language.
5.3.2 Subtitles preference
This menu allows you to set the preferred Subtitles Language and to switch Subtitles Type between
Normal and Hard of Hearing.
5.3.3 TV System
This menu allows to setup different settings concerning your TV set.
Display Mode: PAL/NTSC/AUTO
Aspect Ratio: Use this menu to configure the screen aspect. Possible settings are: 4:3PS
(Pan&Scan), 4:3LB (Letter Box), 16:9 (Wide Screen) and AUTO.
Video Output: Use this menu to switch the video output mode between RGB and CVBS.
5.3.4 Region and Time
Here you can set your region and time zone.
Region: This menu is used for changing the region setting.
GMT Usage: This setting allows you to switch the usage of GMT time on or off.
The options are: Off / User Define / By Region
GMT Offset: This menu is valid only when User Define is selected in GMT Usage menu.
The GMT offset range is -11I30 ~ +12I00, increasing by half
hours progressively.
Date/Time: Date and Time menus are valid only when Off is selected in GMT Usage
menu. Press OK followed by numbers to change the date and time.
Time Display: This menu allows to control whether the time is displayed on screen or not.
The options are: Off/On.
5.3.5 Timer Setting
In this menu you can set a programme timer or sleep timer.
Programme timer
Timer Number: You can set up to 8 timers
Timer Mode: Off/Once/Daily/Weekly/Monthly
Timer Service: TV Service/Radio Service
Wake-up Channel: You can select any channel as wake-up channel.
Month/Date/Day: Use pq to select the start month, date and day.
To Next Page
Loading...
