Strong SRT 5303 - 5.4 Tools and Utilities

10
PART 1 • English
Time: Press OK to input the time with the numeric buttons.
When you leave the programme timer, a saving window appears. Use tu
to select Yes in the confirmation window and press OK to save or select No
to cancel.
Duration: Press OK to input the timer duration with the numeric buttons.
Sleep Timer
You can set the receiver to power OFF in 10 min, 30min, 60min, 90min and 120min automatically.
5.3.6 OSD Setting
This menu allows you to change settings for: Subtitle Display, OSD Transparency and Load Default
OSD Setting.
Subtitle Display: To set the subtitle to Standard or OFF.
OSD Transparency: To set the OSD transparency from Off ~ 50%.
OSD Timeout: To define how long the information banner is to be shown (5S~10S)
Load Default OSD Setting:
To clear all OSD settings and reset to default value.
5.3.7 Parental Lock
This menu allows you to protect the installation menu or channels with a password. You can also
change the Password here. When entering the menu you will be asked to input the password
(defaultI0000).
Menu Lock: Locks the installation menu. You can set menu lock to ON/OFF.
Channel Lock: Off/Manual/Age: 4 - Age: 18
New Password: Input your new password here to change the password.
Confirm Password: Input your new password again to confirm the new password.
5.3.8 Auto Standby
This option allows you to enable or disable Auto Standby. The default setting for Auto Standby is ON.
The receiver will switch to standby automatically when it doesn’t receive commands from the remote
control for three hours. To avoid the automatic switch off, set Auto Standby to OFF.
5.4 Tools
Press MENU to enter Main Menu. Select Tools with the pq buttons and press OK to enter.
1. Use pq to highlight the desired menu and press OK to enter.
2. Press EXIT to leave.
5.4.1 Receiver Information
This menu displays relevant Receiver information like the Receiver Model, Software version,
Signature, and our website www.strong.tv.
1. In Tools menu, select Receiver Information and press OK to open receiver information.
2. Press EXIT to leave.