Strong SRT 5303 - 5.6 Time Shift and Recording; Time Shift Functionality; Program Recording Methods

13
PART 1 • English
English
2. Use pq to select a desired item and use tu to change settings.
3. Press EXIT to exit.
Timeshift Time(min): Maximum shifted time 10/20/30/40/50/60
Record Type: TS/PS (TS mode will record all broadcasted data, including subtitles)
Standby Mode: ON/ OFF (After a Timer recording has ended.)
Record Recovery: ON/ OFF (After a power cut, the receiver will continue to record.)
Step to (min): 0.5/ 1 / 3 / 5 / 10 minutes. Defines the jump interval during the playback of
a recording.
5.5.5 Safely Remove Storage Device
In Media+ menu, select Safely Remove Storage Device and press OK to safely remove the USB device.
A message will then be displayed.
5.5.6 Disk Format
In Media+ menu, select Disk Format and press OK to enter this menu.
You will see actual used Device and Partition displayed, furthermore the available Capability in GB
is shown.
5.6 Time shift and Recording functions
Please connect your USB device to the USB port of your receiver. Wait a few seconds after the
sign for connected device is shown on screen, then you are ready to start Time shift or to record a
broadcasted programme.
Time shift
Time shift function allows you to watch a programme in time shifted mode.
Press TIMESHIFT in viewing mode. Now you can use tu to move the cursor to the desired time
which you want to watch, afterwards press OK to confirm. In case the info banner is not shown, press
the INFO button to call it up/show it again.
Time shift and Record
To perform this action, press 4 followed by the YELLOW (2) button.
Stop Time shift
To stop Time shift, press EXIT or pq. A confirmation window will appear. Select Yes to stop Time
shift or select No to continue Time shift.
Record
There are 3 different ways to record programmes: Instant recording, recording from EPG and
recording via timer
Instant recording
Press 4 in viewing mode to start an instant recording of the current channel.
To adjust the record duration, press 4 again. Insert the time with the numeric buttons and press
OK to confirm. Then press EXIT to remove the message from the screen. Press RED (3) to
stop recording.