Strong SRT 5303 - Media Player; Record Manager; Record Settings

12
PART 1 • English
1. Press MENU to enter main menu. Select Media+ and press OK to enter
Media+ menu.
2. Press pq to highlight desired menu and press OK to enter.
3. Press EXIT to exit.
Use the three button rows on the bottom of RCU for player operation. Description for further usage of
buttons will be displayed on screen.
5.5.1 Media Player
This function allows you to play MPEG-1, MPEG-2, audio and photo files from a connected
storage device.
1. In Media+ menu, select Media Player and press OK to enter Media Player menu.
2. Use to select a desired item, and press OK or BLUE (u) to play the desired files.
3. Press EXIT to exit.
5.5.2 Record Manager
This menu allows you to playback earlier recorded files.
1. In Media+ menu, select Record Manager and press OK to enter Record Manager menu.
2. Use pq to select a desired recording and press OK or BLUE (u) button to playback
the selected file.
3. Press EXIT to exit.
During the playback, it is possible to perform the following actions:
YELLOW (2): to pause the playback.
5 6 for fast forward or fast rewind during playback
GREEN ("): press once to perform slow motion, every further press will change the slow
motion speed (1/2,1/4, 1/8).
RED (3) to stop playback function.
During the playback info banner is on screen (activated by pressing INFO or BLUE (u), the following
actions are possible:
Use numbered button 1 = to set a bookmark during the playback or press it again to delete it. You can
also use the tu buttons to select the position.
Use numbered button 2 = to jump between the bookmarks.
Use numbered button 3 = to jump forwards in time according the set time in Record Settings. See
details in chapter 5.5.4 Record Settings under Steps to (min)
To directly access your recordings from viewing mode press the FILE button on the remote control.
Use pq to select a desired recording and press OK to start playback.
5.5.3 Removable Disk Information
In this menu you can view information about the connected USB storage device.
1. In Media+ menu, select Removable Disk Information and press OK to enter this menu.
2. Press EXIT to exit.
5.5.4 Record Settings
This menu allows you to set the time for Timeshift, define Record Type, set Standby Mode and
Record Recovery.
1. In Media+ menu, select Record Settings and press OK to enter this menu.