4
PART 1 • English
1.4 Accessories
1 User Manual
1 Remote control unit
2x Batteries (AAA type)
Note: The batteries should not be recharged, disassembled, electrically short-
circuited or be mixed or used with other types of batteries.
If rechargeable accumulators instead of batteries are going to be used, we
recommend using (e.g. NiMH) types with low self-discharge to ensure long
time operation of remote control.
1.5 Usage of external USB devices
It is recommended to use USB 2.0 storage devices. If your device is not compatible
to USB 2.0 specifications, recording, playback and other multimedia functions of the
receiver would not work properly.
To ensure best performance of your USB storage device please format it by this
receiver (menu Media+ > Disk Format) to FAT32 system. Other file systems are not
supported by the receiver.
If you are going to use external USB HDD (Hard Disk Drive) please consider that it
might be the case that the power specifications exceed the supported output of your
receiver (5V/800mA). If so, please connect your USB HDD to an according external
power adapter.
STRONG cannot guarantee compatibility to all types of USB storage devices.
It is advised not to store important information on USB storage devices used with
the receiver. Always make backups of data on USB storage device before usage
with receiver. STRONG will not take responsibility for any loss of information or
circumstances caused by loss of information.
2.0 CONNECTION
2.1 Connecting to TV and Terrestrial Antenna
To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT IN
connector at the back of the receiver. (Fig. 1)
2.2 Connecting to a DVD/Video Recorder
Fig. 1
2.3 Connecting to a Digital Audio Amplifier
Connect your Digital Audio Amplifier with the S/PDIF connector on the back of the receiver (Fig. 1).
To Next Page
Loading...
