Struers Xmatic - Page 4

6 Start-up - the first time 47
6.1 Log in as an Administrator 47
6.2 Select language and measurement system 47
6.3 Place the MD surfaces in the MD elevator 47
6.4 Place the bottles in the bottle rack module 49
6.4.1 Alcohol and soap 50
6.4.2 Alcohol separator bottle (option) 50
7 Operate the device 51
7.1 Clamp and level the specimens 51
7.2 Access the work zone 51
7.3 The specimen holder 52
7.3.1 Place and remove the specimen holder 52
7.3.2 Detect the number of specimens 54
7.4 Methods 55
7.4.1 Struers methods 55
7.4.2 Custom methods 61
7.5 The preparation process 65
7.5.1 Prepare the specimen holder for the Xmatic 65
7.5.2 Step selection 65
7.5.3 Indication of missing consumables 66
7.5.4 Start the preparation process 67
7.5.5 Inspect the specimens 69
7.5.6 Manual dressing of the grinding stone 70
7.5.7 Open the MD-elevator 70
7.5.8 Pause the ongoing process 71
7.6 Beacon (option) 72
7.7 History - log file reporting 73
8 Configuration 75
8.1 Preparation 76
8.1.1 Configure Dresser programs for the grinding stone 76
8.1.2 Configure manual dressing of the grinding stone 78
8.1.3 Configure the MD grinding surface 79
8.2 Consumables 80
8.3 Custom consumables 83
8.4 Consumables Lifetime 89
8.5 Cleaning Templates 90
8.5.1 Configure a new cleaning template from a copy 91
8.5.2 Add a new cleaning template 93
8.5.3 Pre-cleaning steps 94
4 Xmatic