Struers Xmatic - 8.1 Preparation; 8.1.1 Configure Dresser programs for the grinding stone

8.1 Preparation
8.1.1 Configure Dresser programs for the grinding stone
Note
You need Administrator access to adjust the settings for dressing of the grinding
stone.
Procedure
1. Log in to the machine as an Administrator.
2. From the Mainmenu, select Configuration.
3. Then select Preparation > Stone to open the dresser program list.
The list shows a number of default dresser programs that cannot be changed. The only exception is
the Manual dressing program (see Configure manual dressing of the grinding stone ►78 on
configuration and Manual dressing of the grinding stone ►70 on operation).
Dresser programs
You can select among one of the following dresser programs:
Note
Dressing after process is selected independently in the preparation method.
Manual Adjust the settings as desired.
76 Xmatic
8 Configuration