Struers Xmatic - 8.2 Consumables

3. Then select Preparation and the MD tab.
4. Now choose the desired settings.
Dressing
To ensure the removal rate of the surface, you can dress the MD-Alto and the diamond-grinding
surfaces, e.g. the MD-Piano.
Cleaning
You can set the machine to automatically clean the surface (MD-Alto, MD-Allegro and MD-Largo and
MD diamond grinding surface) after the process.
We recommend that you also clean the MD-Disc before you apply a new surface.
It is not possible to clean the MD polishing surfaces.
8.2 Consumables
Note
The machine is designed to be used only with Struers consumables specifically
designed for this purpose and this type of machine.
The machine automatically detects the contents of the Struers consumables bottles
and the MD surfaces when you place them in the machine.
Configure consumables
1. Log in to the machine as an Administrator.
2. From the Main menu, select Configuration and Consumables.
3. Select the type of consumable you want to configure, that is MDs (MD surfaces) in the MD
elevator or bottles in the Bottle rack.
80 Xmatic
8 Configuration